Assigning a tag to CPE devices

To assign a tag to CPE devices:

  1. In the menu, go to the SD-WAN → CPE section.

    A table of CPE devices is displayed.

  2. To assign a tag to an individual CPE device:
    1. Click the CPE device to which you want to assign a tag.

      The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand icon expand_panel_up_icon_2. By default, the Configuration tab is selected, which displays general information about the CPE device. This tab also displays the table of Out-of-band management tasks being performed by the orchestrator.

    2. Select the Tags tab.

      The assigned tags are displayed.

    3. Enter the tag and click the assign icon Plus_icon_3.
    4. In the upper part of the settings area, click Save to save CPE device settings.
  3. To assign a tag to multiple CPE devices:
    1. Select check boxes next to the CPE devices to which you want to assign a tag.
    2. In the upper part of the table, click Actions → Add tags.
    3. This opens a window; in that window, enter the tag and click the assign icon Plus_icon_3.
    4. Click Add.

The tag is assigned to the CPE devices.

Page top