A CPE device can have up to four modems for connecting to the cellular network. To display the table of modems, go to the SD-WAN → CPE section, click the CPE device, and select the Modems tab. Information about modems is displayed in the following columns of the table:
Name is the name of the modem.
IP is the IP address of the modem.
Subnet is the subnet to which the modem is connected.
Gateway is the gateway to which the modem is connected.
DNS 1, DNS 2 are DNS servers used by the modem.
Signal is the signal strength of the modem.
Data format is the data transfer protocol of the modem.
Registration is the registration status of the modem.
Network is the network to which the modem is connected.
Country is the country in which the modem is registered.
PLMN MCC is the Mobile Country Code.
PLMN MNC is the Mobile Network Code.
Roaming indicates whether roaming is being used on the modem:
Yes
No
HTTP check is the result of the modem using HTTP to check the availability of the Internet.