Deleting CPE devices

When you delete a CPE device, all service interfaces created on it are automatically deleted.

Deleted CPE devices cannot be restored.

To delete CPE devices:

  1. In the menu, go to the SD-WAN → CPE section.

    A table of CPE devices is displayed.

  2. To delete an individual CPE device:
    1. Click the CPE device that you want to delete.

      The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand icon expand_panel_up_icon_2. By default, the Configuration tab is selected, which displays general information about the CPE device. This tab also displays the table of Out-of-band management tasks being performed by the orchestrator.

    2. In the upper part of the settings area, under Actions, click Delete.
  3. To delete multiple CPE devices:
    1. Select check boxes next to the CPE devices that you want to delete.
    2. In the upper part of the table, click Actions → Delete.
  4. This opens a confirmation window; in that window, select the method for deleting the CPE device:
    • Delete, unregister, and reset password to delete the CPE device from the orchestrator web interface. When powered on, the CPE device reconnects to the orchestrator and is displayed in the orchestrator web interface with the Unknown status.
    • Reset to factory settings to remove the CPE device from the orchestrator web interface and reset the CPE device settings to factory defaults. When powered on, the CPE device does not reconnect to the orchestrator and is not displayed in the orchestrator web interface.
    • Force delete to delete the CPE device from the orchestrator web interface. You can select this option to remove an unavailable CPE or a redundant entry from the orchestrator web interface.
  5. Click Delete.

The CPE devices are deleted and are no longer displayed in the table.

Page top