Creating a forwarding

You can create a forwarding in a firewall template or on a CPE device. A forwarding created in a firewall template is automatically created on all CPE devices that use this firewall template.

To create a forwarding:

1. Create a forwarding in one of the following ways:
   • If you want to create a forwarding in a firewall template, go to the SD-WAN → Firewall templates menu section, click the firewall template, and select the Zones forwarding tab.
   • If you want to create a forwarding on a CPE device, go to the SD-WAN → CPE menu section, click the CPE device, select the Firewall → Zones forwarding tab, and select the Override check box.

   A table of forwardings is displayed.

2. Click + Forwarding.
3. This opens a window; in that window, in the From drop-down list, select a created outbound firewall zone.
4. In the To drop-down list, select a created inbound firewall zone.
5. Click Create.

   The forwarding is created and displayed in the table.

6. In the upper part of the settings area, click Save to save the settings of the firewall template or CPE device.

Page top