Kaspersky SD-WAN

Viewing monitoring results

Expand all | Collapse all

You can view monitoring results for components of the solution. To do so, use the following instructions:

• Viewing CPE device monitoring results.

  Before viewing CPE device monitoring results, you must configure monitoring in the CPE template.

  To view CPE device monitoring results:

  1. In the menu, go to the SD-WAN section.

     By default, the CPE subsection is displayed with a table of CPE devices.

  2. Click the CPE device.

     The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

  3. Select the Monitoring tab.

     The monitoring results are displayed for the entire period. You can display the results for a custom period using the filter in the upper part of the page. For example, you can display results for a year, a month, or an arbitrary time period.

  4. Select the parameter for which you want to display monitoring results.

  The available monitoring results are displayed as a chart.

• Viewing SD-WAN instance monitoring results.

  To view monitoring results for a deployed SD-WAN instance:

  1. In the menu, go to the SD-WAN → SD-WAN instances subsection.

     A table of SD-WAN instances is displayed.

  2. Click the relevant SD-WAN instance.

     The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

  3. Select the Monitoring tab.

     The monitoring results are displayed for the entire period. You can display the results for a custom period using the filter in the upper part of the page. For example, you can display results for a year, a month, or an arbitrary time period.

  4. Select the parameter for which you want to display monitoring results.

  The available monitoring results are displayed as a chart.

• Viewing VNF monitoring results.

  To view VNF monitoring results:

  1. In the menu, go to the Catalog section.

     The network service management page is displayed.

  2. In the Network services panel, select a network service.

     The graphical design tool with the network service topology is displayed.

  3. Click the VNF.

     The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

     By default, the Flavours tab is selected, which displays the flavours of virtual machines for the network function. Flavours are described in the VNF package.

  4. Select the Monitoring tab.

     The monitoring results are displayed for the entire period. You can display the results for a custom period using the filter in the upper part of the page. For example, you can display results for a year, a month, or an arbitrary time period.

  5. Select the parameter for which you want to display monitoring results.

  The available monitoring results are displayed as a chart.

• Viewing PNF monitoring results.

  To view PNF monitoring results:

  1. In the menu, go to the Catalog section.

     The network service management page is displayed.

  2. In the Network services panel, select a network service.

     The graphical design tool with the network service topology is displayed.

  3. Click the PNF.

     The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

     By default, the Flavours tab is selected, which displays the flavours of virtual machines for the network function. Flavours are described in the PNF package.

  4. Select the Monitoring tab.

     The monitoring results are displayed for the entire period. You can display the results for a custom period using the filter in the upper part of the page. For example, you can display results for a year, a month, or an arbitrary time period.

  5. Select the parameter for which you want to display monitoring results.

  The available monitoring results are displayed as a chart.