Configuring a connection with Kaspersky Industrial CyberSecurity for Networks

To configure connection with Kaspersky Industrial CyberSecurity for Networks

1. Open the Kaspersky Security Gateway Console
2. Select the Kaspersky Security Gateway node.
3. In the Connection Settings section of the results pane, click the Configure connection link.

   The Connection Settings window opens.

4. Under Kaspersky Industrial CyberSecurity for Networks, add connection settings for one or more Kaspersky Industrial CyberSecurity for Networks servers:
   1. Click the Add button.

      The Kaspersky Industrial CyberSecurity for Networks connection settings window opens.

   2. Enter the IP address of the Generic type connector previously added to Kaspersky Industrial CyberSecurity for Networks, along with the port number used to connect to it. Range of possible values for the port number: 1–65535.

      Connector connection settings differ from the connection settings of the Kaspersky Industrial CyberSecurity for Networks integration server. For detailed information on connectors, please refer to the Kaspersky Industrial CyberSecurity for Networks Help.

   3. If you want to configure a trusted connection with Kaspersky Industrial CyberSecurity for Networks:
      1. Select the Use pinned certificate to secure connection check box.
      2. Click Load.
      3. This opens a window; in that window, select the file with the TLS certificate.
      4. Click Open.

      Information about the added TLS certificate is displayed under TLS certificate data.

      If you specified a pinned certificate to protect the connection, you must also specify the client certificate. Otherwise, the connection with the Kaspersky Industrial CyberSecurity for Networks cannot be established.

   4. If you want to configure additional protection of the connection using a client certificate:
      1. Select the Secure connection with client certificate check box.
      2. Click Load.
      3. This opens a window; in that window, select a PFX file with the client certificate.
      4. Click Open.
      5. In the field with the same name, enter the password of the client certificate, if any.
   5. Click Test connection.

      The status Connected appears when the connection is established.

   6. Click OK.
   7. If necessary, repeat steps a–f to add connection settings for other Kaspersky Industrial CyberSecurity for Networks servers.

   Kaspersky Industrial CyberSecurity for Networks connection information is displayed in the list in the Connection settings window.

5. Click OK.

You can also configure connection settings using the ConnectionSettings.xml configuration file located in the C:\ProgramData\Kaspersky Lab\Security Gateway\Settings folder. Note that you cannot set the password in the configuration file. Use Kaspersky Security Gateway Console to set the password.

Page top