Configurations of devices categorized as network equipment

The current version of the application lets you receive a configuration for the Network devices device type for the following devices:

• Cisco IOS™ devices.
• Eltex MES series.
• Hirschmann MACH and RS20 series.
• Moxa PT and EDS series.

  Configuration retrieval capabilities for Moxa PT series devices are not supported when the device is in default setup mode (MENU mode).

• Siemens RUGGEDCOM® RSG2100 and SCALANCE series with SSH protocol support.

For the Network devices device type, you can specify the following configuration types for receiving data:

• Users.
• ARP table items.
• Platform version.
• Executable processes.
• Startup configuration.
• Running configuration.
• Routing table.
• MAC table.
• Network interfaces.

Retrievable data on Cisco IOS™ devices

The application retrieves the following data when scanning Cisco IOS™ devices:

• User data:
  • Username in domain\username format.
  • Unique ID of the user.
  • Indication of whether an SSH key is set up.
  • Indication of whether a password has been configured.
  • Indication of whether a secret has been configured for the user.
  • User privilege level.
• Data on ARP table items:
  • IP address.
  • Hardware address.
  • Name of the network interface or adapter.
  • Hardware address type.

  • Entry type.
• OS version.

• Data on running processes:
  • Unique ID of the process.

  • Process name.
• Data on the startup configuration:
  • Name of the parameter section.
  • Textual representation of section parameters.
• Data on the running configuration:
  • Name of the parameter section.
  • Textual representation of section parameters.
• Data on the routing table:
  • Interface name or IP address.
  • Destination subnet.
  • Destination subnet mask.
  • Gateway (address of the next router in the remote network).

  • Protocol.

• Data on the MAC table:
  • VLAN number.
  • MAC address.
  • Type of MAC address.
  • Port of MAC address.
• Data on network interfaces:
  • Description.
  • Indication of whether the network interface is enabled.
  • MAC address.
  • Name.
  • Indication of whether the network interface is a physical interface.
  • Assigned IP address.

Retrievable data on Eltex MES series devices

The application retrieves the following data when scanning Eltex MES series devices:

• Data on ARP table items:
  • IP address.
  • Hardware address.
  • Name of the network interface or adapter.
  • Hardware address type.

  • Entry type.
• OS version.

• Data on the startup configuration:
  • Name of the parameter section.
  • Textual representation of section parameters (output of the show startup-config command).
• Data on the running configuration:
  • Name of the parameter section.
  • Textual representation of section parameters.
• Data on the routing table:
  • Interface name or IP address.
  • Destination subnet.
  • Destination subnet mask.
• Data on the MAC table:
  • VLAN number.
  • MAC address.
  • Type of MAC address.
  • Port of MAC address.
• Data on network interfaces:
  • Description.
  • Indication of whether the network interface is enabled.
  • MAC address.
  • Name.
  • Indication of whether the network interface is a physical interface.

Retrievable data on Hirschmann RS20 and MACH series devices

The application retrieves the following data when scanning Hirschmann RS20 and MACH series devices:

• User data:
  • Username in domain\username format.
  • Operator access mode.
  • Authentication type.
  • Encryption type.
  • User access mode.
• Data on ARP table items:
  • IP address.
  • Hardware address.
  • Name of the network interface or adapter.
  • Hardware address type.
• OS version.

• Data on the running configuration:
  • Name of the parameter section.
  • Textual representation of section parameters.
• Data on the MAC table:
  • VLAN number.
  • MAC address.
  • Type of MAC address.
  • Port of MAC address.

Retrievable data on Moxa EDS and PT series devices

The application retrieves the following data when scanning Moxa EDS and PT series devices:

• OS version.

• Data on the startup configuration:
  • Name of the parameter section.
  • Textual representation of section parameters (output of the show startup-config command).
• Data on the running configuration:
  • Name of the parameter section.
  • Textual representation of section parameters.
• MAC address table details (supported for Moxa EDS series devices only):
  • VLAN number.
  • MAC address.
  • Type of MAC address.
  • Port of MAC address.

Retrievable data on Siemens RUGGEDCOM RSG2100 and SCALANCE series devices with SSH protocol support

The application retrieves the following data when scanning Siemens RUGGEDCOM RSG2100 and SCALANCE series devices:

• Data on ARP table items:
  • IP address.
  • Hardware address.
  • Name of the network interface or adapter.
  • Hardware address type.

  • Recording type (supported only for Siemens SCALANCE series devices).
• OS version.

• Data on the startup configuration:
  • Name of the parameter section.
  • Textual representation of section parameters (output of the info command at different nesting levels for Siemens SCALANCE series devices).
• Running configuration details (supported for Siemens RUGGEDCOM RSG2100 series devices only):
  • Name of the parameter section.
  • Textual representation of section parameters.
• MAC address table details (supported for Siemens RUGGEDCOM RSG2100 series devices only):
  • VLAN number.
  • MAC address.
  • Type of MAC address.
  • Port of MAC address.

Page top