Preparing to install Kaspersky IoT Secure Gateway 1000

Before installing Kaspersky IoT Secure Gateway 1000, you must prepare the Advantech UTX-3117FS-S6A1N device for installation of Kaspersky IoT Secure Gateway 1000.

Preparations for Kaspersky IoT Secure Gateway 1000 installation are performed by Kaspersky experts. The instructions described in this section are provided for information purposes.

To prepare the Advantech UTX-3117FS-S6A1N device for Kaspersky IoT Secure Gateway 1000 installation:

1. Turn on the Advantech UTX-3117FS-S6A1N device.
2. Connect a monitor and keyboard to the appropriate ports on the front panel of the Advantech UTX-3117FS-S6A1N.
3. Click the on/off button in the right part of the front panel of the Advantech UTX-3117.

   The power indicator will light up on the front panel of the Advantech UTX-3117 and the device will start running.

4. While the device is loading, press the DELETE key on the keyboard.

   The main BIOS menu of the Advantech UTX-3117FS-S6A1N device will open.

5. Restore the default settings:
   1. Select the Save & Exit tab.
   2. In the Default Options menu, select Restore Defaults.
   3. Exit the Save & Exit tab by pressing F4.

   The Advantech UTX-3117FS-S6A1N will begin to restart.

6. During the restart, press the DELETE key on the keyboard.

   The main BIOS menu of the Advantech UTX-3117FS-S6A1N device will open.

7. Check the date and time settings.
   1. Select the Main tab.
   2. Select System Date. If necessary, indicate the correct date.
   3. Select System Time. If necessary, indicate the correct time.
8. Modify the secure boot settings of the system:
   1. Select the Security tab.
   2. Select Secure Boot.
   3. Depending on the BIOS version on the Advantech UTX-3117FS-S6A1N device, do one of the following:
      • Select Disabled for the Attempt Secure Boot setting.
      • Select Disabled for the Secure Boot setting.
9. Configure the southbridge:
   1. Select the Chipset tab.
   2. Select South Bridge.
   3. Select Intel Linux for the OS Selection parameter.
10. On the Chipset tab, configure the device to turn on automatically after a sudden power loss:
    1. Select South Cluster Configuration.
    2. Select Power On for the Restore AC Power Loss setting.
11. Configure the advanced settings:
    1. Select the Advanced tab.
    2. In the opened menu, select CSM Configuration.
    3. Select Enabled for the CSM Support setting.
    4. For the Network and Other PCI devices Support settings, select Do not launch.
    5. Return to the Advanced tab by pressing ESC.
    6. In the opened menu, select CPU Configuration. Select Enabled for the VT-d setting.
    7. Return to the Advanced tab by pressing ESC.
    8. In the opened menu, select Network Stack Configuration. Select Enabled for the Network Stack parameter.
    9. Return to the Advanced tab by pressing ESC.
    10. In the opened menu, select Serial Port Console Redirection.
    11. Select Enabled for the Console Redirection setting.
    12. Select Console Redirection Settings.
    13. Select VT100+ for the Terminal Type setting.
    14. Return to the Advanced tab by pressing ESC.
12. Configure the boot settings:
    1. Select the Boot tab.
    2. Select UEFI OS for the Boot Option #1 parameter.
13. Exit BIOS while saving the changes:
    1. Select the Save & Exit tab.
    2. On the Save & Exit tab, select Save Changes & Exit.

The Advantech UTX-3117FS-S6A1N will restart with the configured settings. The device will continue to start with the configured settings on subsequent startups. Before installing Kaspersky IoT Secure Gateway 1000, the device must be shut down.