Creating a static route via the Web Console

You can create new static routes for Kaspersky IoT Secure Gateway 1000 via the Web Console.

Kaspersky IoT Secure Gateway 1000 does not let you create duplicate default routes (second route for the IP address of the destination network 0.0.0.0/0) and routes in which an IP address in the network 127.0.0.0/8 is indicated as the IP address of the destination node.

When creating overlapping routes, you are advised to keep in mind that the route with the longer mask describing a smaller number of destination nodes will be selected to send a network packet to the IP address of the destination node or network.

To create a new static route for Kaspersky IoT Secure Gateway 1000 via the Web Console:

1. In the main window of the Web Console, select Devices → Managed devices.
2. Click the name of the device running Kaspersky IoT Secure Gateway 1000. If the device name is not on the list, add it to the Managed devices group.
3. In the device properties window that opens, select the Applications tab.
4. Press Kaspersky IoT Secure Gateway.

   This opens a window containing information about Kaspersky IoT Secure Gateway 1000.

5. Select the Application settings tab.
6. Select Network → Routing.

   This opens a window containing the routing table of Kaspersky IoT Secure Gateway 1000.

7. Click the Add button in the upper part of the page.
8. In the Add route pane that opens on the right, enter the following data:
   • In the IP address field, enter the IP address of the destination node or network.
   • In the Mask field, enter the destination network mask.
   • In the Gateway field, enter the IP address of the gateway. The gateway IP address must be reachable.

     The gateway IP address is reachable if this IP address resides within a connected network and is one of the nodes of a network configured on the internal or external interface.

9. Click OK in the lower part of the pane to save your changes.

The new static route is created and displayed in the routing table.