Configuring export of KLMS events to KUMA

To configure the export of KLMS events to KUMA:

1. Connect to the KLMS server over SSH and go to the Technical Support Mode menu.
2. Use the klms-control utility to download the settings to the settings.xml file:

   sudo /opt/kaspersky/klms/bin/klms-control --get-settings EventLogger -n -f /tmp/settings.xml

3. Make sure that the settings in the /tmp/settings.xml file have the following values; make changes if necessary:

   <siemSettings>

   <enabled>1</enabled>

   <facility>Local1</facility>

   ...

   </siemSettings>

4. Apply settings with the following command:

   sudo /opt/kaspersky/klms/bin/klms-control --set-settings EventLogger -n -f /tmp/settings.xml

5. To send events via UDP, make the following changes to the /etc/rsyslog.conf configuration file:

   $WorkDirectory /var/lib/rsyslog

   $ActionQueueFileName ForwardToSIEM

   $ActionQueueMaxDiskSpace 1g

   $ActionQueueSaveOnShutdown on

   $ActionQueueType LinkedList

   $ActionResumeRetryCount -1

   local1.* @<<IP address of the KUMA collector>:<port of the collector>>

   If you want to send events over TCP, the last line should be as follows:

   local1.* @@<<IP address of the KUMA collector>:<port of the collector>>

6. Save your changes.
7. Restart the rsyslog service with the following command:

   sudo systemctl restart rsyslog.service