Installing Kaspersky IoT Secure Gateway 1000

To begin working with Kaspersky IoT Secure Gateway 1000, it must be installed on an Advantech UTX-3117FS-S6A1N device.

Installation of Kaspersky IoT Secure Gateway 1000 is performed by Kaspersky experts. The instructions described in this section are provided for information purposes.

To install Kaspersky IoT Secure Gateway 1000:

  1. Download the SystemRescueCd distribution package image from the official SystemRescue website.
  2. On the local computer, create a bootable USB drive containing the SystemRescueCd distribution package, for example, by using the dd utility:

    $ dd if=systemrescuecd-6.0.3.iso of=/dev/%USB device name%

    The dd utility is available only in some UNIX™-based operating systems.

  3. Insert the bootable USB drive containing the SystemRescueCd distribution package into the USB port on the Advantech UTX-3117FS-S6A1N.
  4. Click the on/off button in the right part of the front panel of the Advantech UTX-3117.
  5. Press the DELETE key on the keyboard.

    The main BIOS menu of the Advantech UTX-3117FS-S6A1N device will open.

  6. Configure the settings for loading Kaspersky IoT Secure Gateway 1000 from a bootable USB drive:
    1. Select the Boot tab.
    2. In the Boot Option Priorities section, use the + or - key to move the UEFI: <name_of_bootable_USB> value to the first position.
    3. Exit the Boot tab by pressing ESC.
  7. Exit BIOS while saving the changes:
    1. Select the Save & Exit tab.
    2. On the Save & Exit tab, select Save Changes & Exit.

      After Kaspersky IoT Secure Gateway 1000 is installed and the bootable USB drive is extracted, the settings defined at this step of the instructions will be reset. The next time Kaspersky IoT Secure Gateway 1000 is loaded, it will apply the load settings that were configured during preparations for Kaspersky IoT Secure Gateway 1000 installation.

  8. Go to the directory /tmp by entering the following command in the command line:

    $ cd /tmp

  9. Download the Kaspersky IoT Secure Gateway 1000 installation image from the internal network, for example, by using the wget utility:

    $ wget %path to the installation image of Kaspersky IoT Secure Gateway 1000%

    The Kaspersky IoT Secure Gateway 1000 installation image received in the distribution kit must be put on an HTTP server deployed in the local network in advance.

    The HTTP server and the Advantech UTX-3117FS-S6A1N device must reside in the same network.

  10. Use the command line to unpack the image:

    $ tar -xzf latest-kos-mqtt-broker.tgz

    $ cd kos-mqtt-broker/install

    $ tar -xzf install.tar.gz

  11. Start the installation:

    $ ./install.sh

  12. When installation completes, use the SystemRescueCd tools to shut down the Advantech UTX-3117FS-S6A1N by running the following command:

    $ shutdown -h now

  13. Eject the bootable USB drive containing the SystemRescueCd distribution package.
  14. Turn on the Advantech UTX-3117FS-S6A1N by clicking the on/off button in the right part of the front panel.

Kaspersky IoT Secure Gateway 1000 will start automatically.

After Kaspersky IoT Secure Gateway 1000 starts for the first time, it is recommended to configure the network, create and upload an administrator certificate, configure the date and time, and replace the web server certificate with the one that is used in your organization.

Page top