Viewing events when connected to Kaspersky IoT Secure Gateway 1000 via the console port

Kaspersky IoT Secure Gateway 1000 lets you view Kaspersky IoT Secure Gateway 1000 event logs in real time. To do this, connect the Kraftway Rubezh-N embedded computer to a local computer through the console port.

A console port is a control port providing out-of-band access to the embedded computer.

To view Kaspersky IoT Secure Gateway 1000 event logs in real time via a console port connection:

1. Use a console cable with RJ-45 DB-9 / RS-232 connectors to connect the port on the front panel of the Kraftway Rubezh-N embedded computer to a computer or laptop.

   If your computer does not have a port for the corresponding cable, you can use a USB-COM adapter.

2. Turn on the embedded computer.
3. Using a terminal emulator on the local computer, connect to the embedded computer.

   Before connecting, please specify the following connection settings in your terminal emulator:

   • The data transfer rate should be 115,200 baud, or a different value if it is specifically set for the Recovery mode parameter
   • The number of data bits, availability and type of the parity bit, and the number of stop bits should be 8n1
   • Hardware flow control

Kaspersky IoT Secure Gateway 1000 events will be displayed in real time in the interface of the terminal emulation program running on the desktop or laptop.

Page top