Assigning the IP address and network mask using the DHCP server

To assign the IP address and network mask using the DHCP server:

1. Make sure that value of the Use DHCP setting is set to yes.

   You may need to use the DHCP server for assigning the IP address and network mask if you are configuring the program in test mode.

   The use of the DHCP server for assigning the IP address and network mask is enabled by default.

2. Select Continue.
3. Press Enter.

The program Initial Configuration Wizard proceeds to the next step.

See also Step 9. Configuring the network interface Enabling and disabling the network interface Assigning a static IP address and network mask

Page top