Assigning a static IP address and network mask

To assign a static IP address and network mask:

1. Select the Use DHCP setting.

   It is recommended to assign a static IP address and network mask if you are configuring the program in production mode.

2. Press Enter.

   This opens a window for confirming assignment of static settings for the network interface.

3. Click the Yes button.

   This opens a window for entering a static IP address and network mask.

4. In the Address field, type the IP address that you want to assign for Kaspersky Secure Mail Gateway.
5. In the Netmask field, enter the mask of the network on which you are using the program.
6. Click Ok.

   The Initial Configuration Wizard returns to the network interface configuration window.

7. Verify that the network settings are correct.
8. Select Continue.
9. Press Enter.

The program Initial Configuration Wizard proceeds to the next step.

See also Step 9. Configuring the network interface Enabling and disabling the network interface Assigning the IP address and network mask using the DHCP server

Page top