Assigning static DNS addresses

To assign static DNS addresses:

1. Select no in the configuration window for using the DHCP server to assign DNS addresses.

   It is recommended to assign static DNS addresses if you are configuring the program in production mode.

2. Press Enter.

   This opens the window for entering static DNS addresses.

3. In the Search list field, type the DNS suffix that you want to use with Kaspersky Secure Mail Gateway.
4. In the Primary field, enter the IP address of the primary DNS server in IPv4 format.
5. In the Secondary field, enter the IP address of the secondary DNS server in IPv4 format.
6. Click Ok.

   This opens a window in which you can configure static DNS settings.

7. Verify that the DNS settings are correct.
8. Select Continue.
9. Press Enter.

   This opens a window containing the settings of the Kaspersky Secure Mail Gateway network.

10. Select Continue.
11. Press Enter.

The Initial Configuration Wizard restarts the virtual machine with the new values of settings and proceeds to the next step.

See also Step 11. Configuring DNS settings Assigning DNS addresses using a DHCP server

Page top