Selecting and configuring the task mode

To select and configure the mode for working with certificates:

1. Open the Task settings window.
2. On the General tab, select a mode that supports certificate scanning from the Task mode drop-down list:
   • Driver Interceptor
   • Redirector
3. In the Task mode settings block, configure the following settings:
   • Check safe connections through the HTTPS protocol.
     

     If the check box is selected, intercepted encrypted HTTPS traffic is decompressed and scanned for threats.

     If the check box is cleared, encrypted HTTPS traffic is not decompressed.

     The check box is selected by default.

     Scanning is available only if the HTTPS port is open.

   • Select the versions of the cryptographic protocol that you want to use:
     • TLS 1.0
     • TLS 1.1
     • TLS 1.2

     All versions are selected by default. Moreover, the TLS 1.0 option cannot be disabled.

     Note, that you can use the TLS protocol in the Traffic Security task configuration only on protected devices running Microsoft Windows 7 or later, Microsoft Windows Server 2008 R2 or later.

4. Click OK.

The task configuration is saved.

Page top