Adding a KATA server

If you are using a KATA version older than 5.0, you can configure integration only with a single KATA server.

To add a KATA server:

1. In the application web interface, select Settings → External services → KATA Protection.
2. Select the Settings tab.
3. Click the Add KATA server button in the KATA server settings group.

   The Add KATA server window opens.

4. In the IP address field, enter the fully qualified domain name (FQDN) or IPv4 address of the KATA server on which the Central Node component is installed.

   When integrating with a cluster of multiple servers of KATA 5.0 or later, specify the value 127.0.0.1.

   IPv6 addresses are not supported.

5. In the Port field, enter the KATA server connection port.

   The default value is 443.

   When integrating with multiple servers of KATA 5.0 or later, specify the value 8000.

6. Click Next.

   The SHA256 fingerprint field displays the KATA server certificate fingerprint.

7. Check the entered data and make sure that the certificate fingerprint displayed in the web interface matches the certificate fingerprint of the KATA server. If the fingerprints match, click Confirm.

The KATA server will be added. Information about the server is displayed in the KATA Protection section on the Settings tab in the KATA server settings group.