network

This command lets you configure static IP addressing and SVM network settings.

The new settings are applied after the SVM is restarted or the network service is restarted (the manageservices restart network command).

Settings

<InterfaceName> <IP> <NetMask> <Broadcast> [<GateWay>]

where:

• <InterfaceName> – name of the network interface, for example, eth0.
• <IP> – IP address of the network interface that you want to assign.
• <NetMask> – network mask.
• <Broadcast> – broadcast address.
• <GateWay> – gateway address (optional parameter). It should be set only on one network interface that uses DHCP.

Specific errors

None.