Adding and connecting a sensor automatically over the network

To add and connect a sensor automatically over the network:

1. Connect to the Kaspersky Industrial CyberSecurity for Networks Server through the web interface using the Administrator account.
2. Select Settings → Deployment.
3. Click Add sensor.

   The details area appears in the right part of the web interface window.

4. On the Automatically over the network tab:
   1. Enter the sensor name that will represent the sensor within Kaspersky Industrial CyberSecurity for Networks.

      The sensor name must be unique (not match the names of other sensors or the Server) and must contain no more than 100 characters. You can use letters of the English alphabet, numerals, a space, and the following special characters: _ and - (for example, Sensor_1). The sensor name must begin and end with any permitted character except a space.

   2. Enter the Server IP address that the sensor will use to connect to the Server.
   3. Enter the IP address used by the web server on the sensor computer.
5. Click Connect and add sensor.

   The application will establish a connection with the sensor computer, then the Server web interface page will show a prompt to confirm the received fingerprint for the certificate signing request.

6. Connect to the sensor through the web interface.

   The sensor web interface page will show a message containing information about the certificate request fingerprint that was sent to the Server.

7. Make sure that the sequences of characters representing the certificate request fingerprint are identical on the web interface pages of the sensor and Server.
8. On the Server web interface page, click the button to confirm the received certificate request fingerprint.

The sensor will connect to the Server, then information about the connection will be displayed on the Server and sensor web interface pages.

Page top