Configuring a connection to a remote environment using the Basis.WorkPlace application via the Web Console: one device

In the Web Console application, you can configure the settings for connecting to a remote environment deployed in the Basis.WorkPlace infrastructure.

Users cannot initiate a password change in Kaspersky Thin Client.

To configure settings for connecting to a remote environment deployed in the Basis.WorkPlace infrastructure:

1. In the main window of the Web Console, select Assets (Devices) → Managed devices.
2. In the displayed list, click the name of the relevant thin client. You can view the device name in the Kaspersky Thin Client interface. If the thin client name is not on the list, add it to an administration group.

   If a setting you are configuring is locked in a policy that was created for an administration group, you cannot change this setting when configuring the individual device. Change or unlock this setting in the policy.

3. In the window that opens, select the Applications tab.
4. Click the name of the Kaspersky Security Management Suite web plug-in.

   This opens a window with information about Kaspersky Thin Client.

5. Select the Application settings tab.
6. Select Connections → Basis.WorkPlace.

   This opens a window in which you can configure settings for connecting to a remote environment (see the figure below).

   

   Window for configuring settings for connecting to a remote environment deployed in the Basis.WorkPlace via the Web Console

7. In IP address or server name, enter the IP address or server name to connect to.
8. If two monitors are installed at your workstation and you want a remote desktop image to be displayed on both monitors, select the Use two monitors check box in the Monitor management block.
9. Click Save in the lower part of the window.

The changes are saved and applied to Kaspersky Thin Client installed on a thin client after synchronizing Kaspersky Thin Client and Kaspersky Security Center.

Page top