Hardware and software requirements
This article describes hardware requirements of single-node deployment scheme and multi-node deployment scheme, software requirements of Open Single Management Platform, hardware and software requirements of Kaspersky Deployment Toolkit and OSMP components.
Single-node deployment: hardware requirements
Single-node deployment requires less resources (see the table below), but the following considerations should be taken into account:
- Single-node scheme only supports up to 10,000 devices in the network.
- The database is located on the primary worker node outside the cluster.
In case of single-node deployment, it is strongly recommended that you first install the DBMS manually on the host that will act as a primary node. After that, you can deploy Kaspersky Next XDR Expert on the same host.
- Additional nodes are required for KATA/KEDR.
- To deploy the solution correctly, ensure that CPU of the target host supports the BMI, AVX, and SSE 4.2 instruction set.
Minimum hardware requirements
Hardware requirements for a single-node deployment scheme
Solution
250 devices
1000 devices
3000 devices
5000 devices
10,000 devices
A solution that includes the following applications:
- Open Single Management Platform
- Kaspersky Unified Monitoring and Analysis Platform
- Kaspersky Anti-Targeted Attack Platform / Kaspersky Endpoint Detection and Response Central Node
Note: The requirements do not take into account hosts for KEDR services.
1 XDR primary node:
- CPU: 8 cores, operating frequency of 2.5 GHz
- RAM: 27 GB
- Available disk space: 360 GB
1 KUMA services node:
- CPU: 10 cores
- RAM: 16 GB
- Disk space: 500 GB
1 XDR primary worker node:
- CPU: 8 cores, operating frequency of 2.5 GHz
- RAM: 32 GB
- Available disk space: 400 GB
1 KUMA services node:
- CPU: 10 cores
- RAM: 16 GB
- Disk space: 600 GB
1 XDR primary worker node:
- CPU: 11 cores, operating frequency of 2.5 GHz
- RAM: 38 GB
- Available disk space: 600 GB
1 KUMA services node:
- CPU: 10 cores
- RAM: 16 GB
- Disk space: 1000 GB
1 XDR primary worker node:
- CPU: 15 cores, operating frequency of 2.5 GHz
- RAM: 46 GB
- Available disk space: 740 GB
1 KUMA services node:
- CPU: 10 cores
- RAM: 16 GB
- Disk space: 1400 GB
1 XDR primary worker node:
- CPU: 18 cores, operating frequency of 2.5 GHz
- RAM: 57 GB
- Available disk space: 1500 GB
1 KUMA services node:
- CPU: 10 cores
- RAM: 16 GB
- Disk space: 2400 GB
Multi-node deployment: hardware requirements
Multi-node deployment requires more resources (see the table below). For this scheme, the following considerations should be taken into account:
- Multi-node cluster scheme is recommended for networks that exceed 10,000 devices.
- The database is located on a separate host outside the cluster.
- To deploy the solution correctly, ensure that CPUs of target hosts support the BMI, AVX, and SSE 4.2 instruction set.
Minimum hardware requirements
Hardware requirements for a multi-node deployment scheme
Solution
20,000 devices
30,000 devices
50,000 devices
A solution that includes the following applications:
- Open Single Management Platform
- Kaspersky Unified Monitoring and Analysis Platform
- Kaspersky Anti-Targeted Attack Platform / Kaspersky Endpoint Detection and Response Central Node
Note: The requirements do not take into account hosts for KEDR services.
12 nodes:
- 1 XDR primary node
- 3 XDR worker nodes
- 1 XDR database node
- 1 KUMA collector
- 1 KUMA correlator
- 3 KUMA keeper
- 2 KUMA storage
12 nodes:
- 1 XDR primary node
- 3 XDR worker nodes
- 1 XDR database node
- 1 KUMA collector
- 1 KUMA correlator
- 3 KUMA keeper
- 2 KUMA storage
12 nodes:
- 1 XDR primary node
- 3 XDR worker nodes
- 1 XDR database node
- 1 KUMA collector
- 1 KUMA correlator
- 3 KUMA keeper
- 2 KUMA storage
1 XDR primary node:
- CPU: 4 cores
- RAM: 8 GB
- Available disk space: 500 GB
3 XDR worker nodes:
- CPU: 8 cores
- RAM: 20 GB
- Available disk space: 1 TB
1 XDR database node:
- CPU: 10 cores
- RAM: 21 GB
- Available disk space: 1.6 TB
1 KUMA collector node:
- CPU: 8 cores
- RAM: 16 GB
- Available disk space: 500 GB
1 KUMA correlator node:
- CPU: 8 cores
- RAM: 32 GB
- Available disk space: 500 GB
3 KUMA keeper nodes:
- CPU: 6 cores
- RAM: 12 GB
- Available disk space: 150 GB
2 KUMA storage nodes:
- CPU: 24 cores
- RAM: 64 GB
- Available SSD disk space: 4.7 TB
Network bandwidth: 10 Gbps for each node
1 XDR primary node:
- CPU: 4 cores
- RAM: 8 GB
- Available disk space: 500 GB
3 XDR worker nodes:
- CPU: 10 cores
- RAM: 24 GB
- Available disk space: 1 TB
1 XDR database node:
- CPU: 12 cores
- RAM: 24 GB
- Available disk space: 2.7 TB
1 KUMA collector node:
- CPU: 8 cores
- RAM: 16 GB
- Available disk space: 500 GB
1 KUMA correlator node:
- CPU: 8 cores
- RAM: 32 GB
- Available disk space: 500 GB
3 KUMA keeper nodes:
- CPU: 6 cores
- RAM: 12 GB
- Available disk space: 150 GB
2 KUMA storage nodes:
- CPU: 24 cores
- RAM: 64 GB
- Available SSD disk space: 7 TB
Network bandwidth: 10 Gbps for each node
1 XDR primary node:
- CPU: 4 cores
- RAM: 8 GB
- Available disk space: 500 GB
3 XDR worker nodes:
- CPU: 12 cores
- RAM: 28 GB
- Available disk space: 1 TB
1 XDR database node:
- CPU: 16 cores
- RAM: 32 GB
- Available disk space: 4.3 TB
1 KUMA collector node:
- CPU: 8 cores
- RAM: 16 GB
- Available disk space: 500 GB
1 KUMA correlator node:
- CPU: 8 cores
- RAM: 32 GB
- Available disk space: 500 GB
3 KUMA keeper nodes:
- CPU: 6 cores
- RAM: 12 GB
- Available disk space: 150 GB
2 KUMA storage nodes:
- CPU: 24 cores
- RAM: 64 GB
- Available SSD disk space: 12 TB
Network bandwidth: 10 Gbps for each node
Open Single Management Platform: Software requirements
Software requirements and supported systems and platforms
Operating system |
64-bit versions of the following operating systems are supported: Ubuntu Server 22.04 LTS Ubuntu Server 24.04 LTS Debian GNU/Linux 12.х (Bookworm) Astra Linux Special Edition RUSB.10015-01 (operational update 1.8.1) On the target hosts with the Ubuntu family operating systems, the Linux kernel version must be 5.15.0.107 or later. |
||||||||||||||||||||||||||||||||||||||||
Packages |
Python 3.8 or later |
||||||||||||||||||||||||||||||||||||||||
Virtualization platforms |
Open Single Management Platform supports all the virtualization platforms listed here. However, there are limitations for Open Single Management Platform components. The differences are presented in the table below.
|
||||||||||||||||||||||||||||||||||||||||
Database management system (DBMS) |
PostgreSQL 15.х 64-bit PostgreSQL 16.x 64-bit PostgreSQL 17.x 64-bit Postgres Pro 15.х 64-bit (all editions) Postgres Pro 16.x 64-bit (all editions) Postgres Pro 17.x 64-bit (all editions) |
||||||||||||||||||||||||||||||||||||||||
File system on the cluster nodes (controller and workers) |
ext4 XFS |
Open Single Management Platform components
To view the hardware and software requirements for an Open Single Management Platform component, click its name:
- OSMP Console
- Kaspersky Unified Monitoring and Analysis Platform (hereinafter KUMA)
- Secondary Kaspersky Security Center Administration Servers
- Kaspersky Security Center Network Agent
- Kaspersky Endpoint Security for Windows
- Kaspersky Anti Targeted Attack Platform (hereinafter KATA)
- Kaspersky Industrial CyberSecurity for Networks
- Kaspersky Industrial CyberSecurity for Nodes
- Kaspersky CyberTrace
- Kaspersky Threat Intelligence Portal
- Kaspersky Automated Security Awareness Platform (hereinafter KASAP)