Hardware overview

This section contains a brief overview of the hardware components of Kaspersky IoT Secure Gateway 100 (see the figure below). For complete information on the employed hardware, please refer to the User Guide for the Siemens SIMATIC IOT2040 device.

Siemens SIMATIC IOT2040 device

The numbers on the diagram represent the following components:

1 – Ethernet 10/100 Mbps interfaces (two connectors).

2 and 9 – holes for mounting brackets on a wall (two holes on the upper edge of the device chassis and two on the lower edge).

3 – LED indicators (five light-emitting diodes).

4 – right-side cover.

5 – left-side cover.

6 – hole for sealing the left-side cover.

7 – restart button.

8 – power connector.

The purpose of the USB and COM interfaces (RS232/422/485) and the User button are not examined in this document because these hardware components are not used in the software portion of Kaspersky IoT Secure Gateway 100 version 2.0.