Preparing to install Kaspersky IoT Secure Gateway 1000

Before installing Kaspersky IoT Secure Gateway 1000, you have to prepare the Kraftway Rubezh-N device for installation.

Preparations for Kaspersky IoT Secure Gateway 1000 installation are performed by Kaspersky experts. The instructions described in this section are provided for information purposes.

Preparing the Kraftway Rubezh-N device

To prepare the Kraftway Rubezh-N device for installing Kaspersky IoT Secure Gateway 1000:

1. Turn on the Kraftway Rubezh-N device.
2. Connect the Kraftway Rubezh-N device through a COM port to a local computer using a cable with an RJ45-DB9 connector.

   Connect the cable to the Kraftway Rubezh-N device console connector.

3. On the local computer, start a COM port terminal application, such as PuTTY or Minicom.
4. Click the on/off button in the left part of the Kraftway Rubezh-N front panel.

   The power indicator will light up on the front panel of Kraftway Rubezh-N, and the device will start running.

5. While the device is loading, press the DELETE key on the keyboard.

   The main BIOS menu of the Kraftway Rubezh-N device opens in the terminal.

6. Check the date and time settings.
   1. Select the Main tab.
   2. Select System Date. If necessary, indicate the correct date.
   3. Select System Time. If necessary, indicate the correct time.
7. Exit BIOS while saving the changes:
   1. Select the Save & Exit tab.
   2. On the Save & Exit tab, select Save Changes & Exit.

Kraftway Rubezh-N will reboot with the configured settings. The device will continue to start with the configured settings on subsequent startups. Before installing Kaspersky IoT Secure Gateway 1000, the device must be shut down.