Modifying an IP address in the IP address allowlist

The IP addresses of devices whose network traffic should be allowed can be added to the allowlist.

To add an IP address to the IP address allowlist:

1. In the main window of the Web Console, select Devices → Managed devices.
2. Click the name of the device running Kaspersky IoT Secure Gateway 1000. If the device name is not on the list, add it to the Managed devices group.
3. In the device properties window that opens, select the Applications tab.
4. Press Kaspersky IoT Secure Gateway.

   This opens a window containing information about Kaspersky IoT Secure Gateway 1000.

5. Select the Application settings tab.
6. Select Network → Network Protector.
7. Click the Show list button next to the IP address allowlist header.

   The IP address allowlist window will be displayed.

8. If you want to filter the list of IP addresses, click the Filter button, and define and apply filtering criteria.
9. Select the IP address of the device that you want to change and click Edit at the top of the table.
10. In the IP address (source) field in the panel that opens on the right, edit the IP address from which you want to allow traffic.

    The IP address must meet the following requirements:

    • Contains four numbers from 0 to 255 and the delimiter. separating these.
    • Does not start with 0.
    • Is not blank.
    • Does not match 255.255.255.255.
11. Click Save in the lower part of the pane.
12. Click Save at the bottom of the IP address allowlist page.

The device IP address in the IP addresses allowlist is updated. After synchronization between Kaspersky IoT Secure Gateway 1000 and the Kaspersky Security Center 14.2 Web Console, any changes to the IP address allowlist will be forwarded to Kaspersky IoT Secure Gateway 1000.