Viewing information about nodes with application components installed and about network interfaces on nodes
Users with the Administrator role and users with the Operator role can both view information about nodes with application components installed and about network interfaces on nodes.
To view information about nodes and network interfaces:
- Connect to the Kaspersky Industrial CyberSecurity for Networks Server through the web interface.
- Select Settings → Deployment.
The web interface window displays node tiles (on the left) and network interface tiles detected on these nodes (on the right of each node).
- If you want to view detailed information about a node or network interface, select the tile of the relevant node or network interface.
The details area appears in the right part of the web interface window.
Displayed information about nodes with application components installed
A node tile displays the following information:
- Current node status.
OK. The node is available, and no application messages about non-critical malfunctions or disrupted operation were received from this node.
Non-critical malfunction. The node is available, and application messages with the Unknown or Malfunction status were received from it.
Operation disrupted. The node is available, and application messages with the Moderate malfunction, Critical malfunction or Fatal malfunction status were received from this node.
No connection. The node is unavailable.
- Node name.
- Application component installed on the node: Server or Sensor.
- IP address for connecting to the node (address 0.0.0.0 corresponds to all possible IP addresses on the computer).
- The current mode of the technologies for which the operating mode can be selected. The tile contains the name of the mode: Learning or Monitoring, if all technologies operate in this mode. If different modes are selected for the technologies, the Mixed value is displayed.
- If the inheritance of Server technologies is disabled for a sensor, the
icon is displayed.
How to view the node information in the details area
Displayed information about network interfaces
A network interface tile displays the following information:
- Icon showing if a network cable is connected to the Ethernet port of the network interface:
– the network cable is connected.
– the network cable is disconnected.
The icon blinks when Ethernet port blink mode is enabled.
- Network interface name in the operating system.
- MAC address.
- Rate of incoming traffic received by the network interface.
- Information about the monitoring point (if one was added):
- Current status of the monitoring point:
OK. The monitoring point is available.
Switchover. The operating mode of the monitoring point is being changed.
Error. An error was detected when switching over the operating mode of the monitoring point.
- Monitoring point name.
- Current operating mode of the monitoring point:
- If the monitoring point is disabled, the Disabled value is displayed.
- If the monitoring point is enabled, the current mode of the technologies for which the operating mode can be selected is displayed. The tile contains the name of the mode: Learning or Monitoring, if all technologies operate in this mode. If different modes are selected for the technologies, the Mixed value is displayed.
- If the inheritance of the node technologies is disabled for a monitoring point, the
icon is displayed.
- Current status of the monitoring point:
How to view the network interface information in the details area