Editing a route map

You can edit a route map on an individual CPE device or on all devices that use the CPE template. For a description of the settings, see the instructions for creating a route map.

To edit a route map on an individual CPE device:

1. In the menu, go to the SD-WAN section.

   By default, the CPE subsection is displayed with a table of CPE devices.

2. Click the CPE device.

   The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

3. Select the Routing Filters → Route maps tab.

   A table of route maps is displayed.

4. Select the Override check box to ignore the applied CPE template and make the settings in the selected tab editable. This check box is cleared by default.
5. Click Edit next to the route map.
6. This opens a window; in that window, edit the settings that you want to change:
7. Click Save.
8. In the upper part of the settings area, click Save to save the configuration of the CPE device.

To edit a route map on all devices that use the CPE template:

1. In the menu, go to the SD-WAN → CPE templates subsection.

   A table of CPE templates is displayed.

2. Click the CPE template.

   The settings area is displayed in the lower part of the page. You can expand the settings area to fill the entire page by clicking the expand button .

3. Select the Routing Filters → Route maps tab.

   A table of route maps is displayed.

4. Click Edit next to the route map.
5. This opens a window; in that window, edit the settings that you want to change:
6. Click Save.
7. In the upper part of the settings area, click Save to save the configuration of the CPE template.