Adding an additional static route

To add an additional static network route:

1. Select the Edit static routes setting (see figure below).

   

   Configuring additional static network routes

2. Press Enter.

   A window for select additional static route configuration options opens (see figure below).

   

   Adding a new static route

3. Select New route.
4. Press Enter.

   A window for entering the static route settings opens (see figure below).

   

   Specifying static route settings

5. In the Address field, enter the IP address of the static route.
6. In the Netmask field, enter the mask of the static route network.
7. Type the gateway address in the Gateway field.
8. Click OK.

   A window opens, letting you select the network interface for which you want to configure the static route (see figure below).

   

   Selecting the network interface of the static route

9. Select a network interface.
10. Press Enter.

    A window with a list of additional static routes opens (see figure below).

    

    List of additional static network routes

11. Select Go back.
12. Press Enter.

    The Initial Configuration Wizard of the Kaspersky Secure Mail Gateway virtual machine returns to the network routes configuration window (see figure below).

    

    Finishing the configuration of network routes

13. Make sure that the network route settings have been configured correctly.
14. Select Continue.
15. Press Enter.

The Initial Configuration Wizard of the Kaspersky Secure Mail Gateway virtual machine proceeds to the next step.

See also Step 9. Configuring network routes Assigning a gateway address using the DHCP server Assigning a static gateway address Modifying an additional static route Deleting an additional static route Assigning a gateway address using the DHCP server Assigning a static gateway address Modifying an additional static route Deleting an additional static route

Page top