Modifying an additional static route

To modify an additional static route:

1. Select the Edit static routes setting (see figure below).

   

   Configuring additional static network routes

2. Press Enter.

   A window with a list of additional static routes opens (see figure below).

   

   List of additional static network routes to modify

3. Select an additional static network route that you want to modify.
4. Press Enter.
5. A window for entering the static route settings opens (see figure below).

   

   Specifying static route settings

6. Make changes in the Address field to modify the IP address of the static route.
7. Make changes in the Netmask field to modify the mask of the static route network.
8. Make changes in the Gateway field to modify the gateway address.
9. Click OK.

   A window opens, letting you select the network interface for which you want to configure the static route (see figure below).

   

   Selecting the network interface of the static route

10. Select a network interface.
11. Press Enter.

    A window with a list of additional static routes opens (see figure below).

    

    List of additional static network routes

12. Select Go back.
13. Press Enter.

    The Initial Configuration Wizard of the Kaspersky Secure Mail Gateway virtual machine returns to the network routes configuration window (see figure below).

    

    Finishing the configuration of network routes

14. Make sure that the network route settings have been configured correctly.
15. Select Continue.
16. Press Enter.

The Initial Configuration Wizard of the Kaspersky Secure Mail Gateway virtual machine proceeds to the next step.

See also Step 9. Configuring network routes Assigning a gateway address using the DHCP server Assigning a static gateway address Adding an additional static route Deleting an additional static route

Page top