Assigning a gateway address using the DHCP server

To assign the gateway address using the DHCP server:

1. Make sure that in the Default route list the Gateway setting has the value dhcp.

   You may need to use the DHCP server for assigning the gateway address if you are configuring the program in test mode.

   The use of the DHCP server for assigning the gateway address is enabled by default.

2. Select Continue.
3. Press Enter.

The program Initial Configuration Wizard proceeds to the next step.

See also Step 10. Configuring network routes Assigning a static gateway address Adding an additional static route Modifying an additional static route Deleting an additional static route

Page top