Modifying an additional static route

To modify an additional static route:

1. Select the Edit static routes setting.
2. Press Enter.

   This opens a window containing a list of additional static routes.

3. Select an additional static network route that you want to modify.
4. Press Enter.
5. This opens a window in which you can enter static route settings.
6. Make changes in the Address field to modify the IP address of the static route.
7. Make changes in the Netmask field to modify the mask of the static route network.
8. Make changes in the Gateway field to modify the gateway address.
9. Click Ok.

   A window opens, letting you select the network interface for which you want to configure the static route.

10. Select a network interface.
11. Press Enter.

    This opens a window containing a list of additional static routes.

12. Select Go back.
13. Press Enter.

    The Initial Configuration Wizard returns to the network route configuration window.

14. Make sure that the network route settings have been configured correctly.
15. Select Continue.
16. Press Enter.

The program Initial Configuration Wizard proceeds to the next step.

See also Step 10. Configuring network routes Assigning a gateway address using the DHCP server Assigning a static gateway address Adding an additional static route Deleting an additional static route

Page top