Adding an additional static route

To add an additional static network route:

1. Select the Edit static routes setting.
2. Press Enter.

   This opens a window in which you can select actions for additional static route configuration.

3. Select New route.
4. Press Enter.

   This opens a window in which you can enter static route settings.

5. In the Address field, enter the IP address of the static route.
6. In the Netmask field, enter the mask of the static route network.
7. Type the gateway address in the Gateway field.
8. Click Ok.

   A window opens, letting you select the network interface for which you want to configure the static route.

9. Select a network interface.
10. Press Enter.

    This opens a window containing a list of additional static routes.

11. Select Go back.
12. Press Enter.

    The Initial Configuration Wizard returns to the network route configuration window.

13. Make sure that the network route settings have been configured correctly.
14. Select Continue.
15. Press Enter.

The program Initial Configuration Wizard proceeds to the next step.

See also Step 10. Configuring network routes Assigning a gateway address using the DHCP server Assigning a static gateway address Modifying an additional static route Deleting an additional static route Assigning a gateway address using the DHCP server Assigning a static gateway address Modifying an additional static route Deleting an additional static route

Page top