How to modify the Network Agent connection parameters with the help of "klmover" utility in Kaspersky Endpoint Security 10 for Mac

 

Kaspersky Endpoint Security 10 for Mac

 
 
 

How to modify the Network Agent connection parameters with the help of "klmover" utility in Kaspersky Endpoint Security 10 for Mac

Back to "Troubleshooting"
Latest update: October 23, 2019 ID: 12336
 
 
 
 

This article concerns Kaspersky Endpoint Security 10 for Mac

  • Service Pack 2 Maintenance Release 1 (version 10.2.1.319)
  • Service Pack 2 (version 10.2.0.267)
  • Service Pack 1 (version 10.1.0.622)
 
 
 
 

The "klmover" utility changes the connection parameters in the settings of Network Agent on a client computer.

To launch the utility, run the following command with a set of needed parameters:

/Library/Application\ Support/Kaspersky\ Lab/klnagent/Binaries/klmover [-logfile file_name] 
[-address server_address] [-pn port_number] [-ps SSL_port_number] [-nossl] 
[-cert path_to_certificate_file] [-silent] [-dupfix]
Run the utility on a client computer under the local administrator account.
Parameter Description

-logfile file_name

Save the utility operation results to the specified file. In case the parameter was not specified, the operation results and the error messages will be shown on the screen.

-address server_address

The address of the Administration Server that will be used by Network Agent to establish connection. You can enter the IP address or the DNS name of the server.

-pn port_number

The port number for an unsecured connection to the Administration Server. Port 14000 is used by default.

-ps SSL_port_number

The port number for a secured connection to the Administration Server via SSL protocol. Port 13000 is used by default.

-nossl

Use an unsecured connection to the Administration Server. In case the parameter was not specified, Network Agent will establish a secured connection to the Administration Server via SSL protocol.

-cert path_to_certificate_file

Utilize the specified certificate file to complete authentication on the new Administration Server. In case the parameter was not specified, Network Agent will receive the certificate upon connecting to the Administration Server for the first time.

-silent

Run the utility in noninteractive mode.

-dupfix

This parameter is mandatory in cases when Network Agent was installed in an alternative way, e.g. restored from a system image.


An example of the utility operation:

klmover -address admsrv -logfile klmover.log 
Run the utility on a client computer only once. Repeated utility operations will cause computer name duplicates to appear in the Kaspersky Security Center 10 console.
 
 
 
 
Was this information helpful?
Yes No
Thank you
 

 
 

How can we improve this article?

Your feedback will be used for content improvement purposes only. If you need assistance, please contact technical support.

Submit Submit

Thank you for your feedback!

Your suggestions will help improve this article.

OK