Configuring routing via the Web Console

You can configure routing for more flexible management of network packets that pass through a device with Kaspersky IoT Secure Gateway 1000.

Data transfer using static routes for the internal network is possible only for the network router device type.

To view the routing table of Kaspersky IoT Secure Gateway 1000:

1. In the main window of the Web Console, select Devices → Managed devices.
2. Click the name of the device running Kaspersky IoT Secure Gateway 1000. If the device name is not on the list, add it to the Managed devices group.
3. In the device properties window that opens, select the Applications tab.
4. Press Kaspersky IoT Secure Gateway.

   This opens a window containing information about Kaspersky IoT Secure Gateway 1000.

5. Select the Application settings tab.
6. Select Network → Routing.
7. Kaspersky IoT Secure Gateway 1000 will display the routing table containing the following information:
   • Type – type of route:
     • Static – route for which the settings for routing network packets were manually defined.
     • Dynamic – route for which the settings for routing network packets are automatically determined by using a DHCP server, for example.
   • IP address – IP address of the destination node or network.
   • Mask – destination network mask.
   • Gateway – IP address of the gateway in the network to which you need to transmit the traffic on the way to the specified IP address of the destination node or network.
   • Status – route state:
     • Active – the route was applied and is used for data transmission.
     • Error – the route was not applied and cannot be used for data transmission because an error was made when creating the route. The error description is displayed on the right of the state. The Error state is displayed if the IP address of the gateway in the network is unreachable or if an invalid IP address or network mask was indicated as the destination node or network.
     • Pending – intermediate state. After synchronization with Kaspersky IoT Secure Gateway 1000 is complete, the current state is changed to Active or Error.

You can create, edit and delete routes of Kaspersky IoT Secure Gateway 1000 via the Web Console. You can also configure routing in the Kaspersky IoT Secure Gateway 1000 interface.