Configuring the display of a link to a Kaspersky Endpoint Detection and Response detection in KUMA event details

When Kaspersky Endpoint Detection and Response detections are received, KUMA creates an alert for each detection. You can configure the display of a link to a Kaspersky Endpoint Detection and Response detection in KUMA alert information.

You can configure the display of a detection link if you use only one Central Node server in Kaspersky Endpoint Detection and Response. If Kaspersky Endpoint Detection and Response is used in a distributed solution mode, it is impossible to configure the display of the links to Kaspersky Endpoint Detection and Response detections in KUMA.

To configure the display of a link to a detection in KUMA alert details, you need to complete steps in the Kaspersky Endpoint Detection and Response web interface and KUMA.

In the Kaspersky Endpoint Detection and Response web interface, you need to configure the integration of the application with KUMA as a SIEM system. For details on configuring integration, refer to the Kaspersky Anti Targeted Attack Platform documentation, Configuring integration with a SIEM system section.

Configuring the display of a link in the KUMA web interface includes the following steps:

1. Adding an asset that contains information about the Kaspersky Endpoint Detection and Response Central Node server from which you want to receive detections, and assigning a category to that asset.
2. Creating a correlation rule.
3. Creating a correlator.

You can use a pre-configured correlation rule. In this case configuring the display of a link in the KUMA web interface includes the following steps:

1. Creating a correlator.

   Select the [OOTB] KATA Alert correlation rule.

2. Adding an asset that contains information about the Kaspersky Endpoint Detection and Response Central Node server from which you want to receive detections and assigning a category KATA standAlone to that asset.

Step 1. Adding an asset and assigning a category to it

First, you need to create a category that will be assigned to the asset being added.

To add a category:

1. In the KUMA web interface, select the Assets section.
2. On the All assets tab, expand the category list of the tenant by clicking next to its name.
3. Select the required category or subcategory and click the Add category button.

   The Add category details area appears in the right part of the web interface window.

4. Define the category settings:
   1. In the Name field, enter the name of the category.
   2. In the Parent field, indicate the position of the category within the categories tree hierarchy. To do so, click the button and select a parent category for the category you are creating.

      Selected category appears in Parent fields.

   3. If required, define the values for the following settings:
      • Assign a severity to the category in the Priority drop-down list.

        The specified severity is assigned to correlation events and alerts associated with the asset.

      • If required, add a description for the category in the Description field.
      • In the Categorization kind drop-down list, select how the category will be populated with assets. Depending on your selection, you may need to specify additional settings:
        • Manually—assets can only be manually linked to a category.
        • Active—assets will be assigned to a category at regular intervals if they satisfy the defined filter.
          1. In the Repeat categorization every drop-down list, specify how often assets will be linked to a category. You can select values ranging from once per hour to once per 24 hours.

             You can forcibly start categorization by selecting Start categorization in the category context menu.

          2. In the Conditions settings block, specify the filter for matching assets to attach to an asset category.

             You can add conditions by clicking the Add condition buttons. Groups of conditions can be added by using the Add group buttons. Group operators can be switched between AND, OR, and NOT values.

             Categorization filter operands and operators

             Operand	Operators	Comment
             Build number	>, >=, =, <=, <
             OS	=, like	The "like" operator ensures that the search is not case sensitive.
             IP address	inSubnet, inRange	The IP address is indicated in CIDR notation (for example: 192.168.0.0/24). When the inRange operator is selected, you can indicate only addresses from private ranges of IP addresses (for example: 10.0.0.0–10.255.255.255). Both addresses must be in the same range.
             FQDN	=, like	The "like" operator ensures that the search is not case sensitive.
             CVE	=, in	The "in" operator lets you specify an array of values.
             Software	=, like
             CII	in	More than one value can be selected.
             Anti-virus databases last updated	>=,<=
             Last update of the information	>=,<=
             Protection last updated	>=,<=
             System last started	>=,<=
             KSC extended status	in	Extended status of the device. More than one value can be selected.
             Real-time protection status	=	Status of Kaspersky applications installed on the managed device.
             Encryption status	=
             Spam protection status	=
             Anti-virus protection status of mail servers	=
             Data Leakage Prevention status	=
             KSC extended status ID	=
             Endpoint Sensor status	=
             Last visible	>=,<=

          3. Use the Test conditions button to make sure that the specified filter is correct. When you click the button, you should see the Assets for given conditions window containing a list of assets that satisfy the search conditions.
        • Reactive—the category will be filled with assets by using correlation rules.
5. Click the Save button.

To add an asset:

1. In the KUMA web interface, select the Assets section.
2. Click the Add asset button.

   The Add asset details area opens in the right part of the window.

3. Define the following asset parameters:
   1. In the Asset name field, enter an asset name.
   2. In the Tenant drop-down list, select the tenant that will own the asset.
   3. In the IP address field, specify the IP address of the Kaspersky Endpoint Detection and Response Central Node server from which you want to receive detections.
   4. In the Categories field, select the category that you added in the previous step.

      If you are using a predefined correlation rule, you need to select the KATA standAlone category.

   5. If required, define the values for the following fields:
      • In the FQDN field, specify the Fully Qualified Domain Name of the Kaspersky Endpoint Detection and Response server.
      • In the MAC address field, specify the MAC address of the Central Node Kaspersky Endpoint Detection and Response Central Node server.
      • In the Owner field, define the name of the asset owner.
4. Click the Save button.

Step 2. Adding a correlation rule

To add a correlation rule:

1. In the KUMA web interface, select the Resources section.
2. Select Correlation rules and click the Create correlation rule button.
3. On the General tab, specify the following settings:
   1. In the Name field, define the rule name.
   2. In the Type drop-down list, select simple.
   3. In the Propagated fields field, add the following fields: DeviceProduct, DeviceAddress, EventOutcome, SourceAssetID, DeviceAssetID.
   4. If required, define the values for the following fields:
      • In the Rate limit field, define the maximum number of times per second that the rule will be triggered.
      • In the Severity field, define the severity of alerts and correlation events that will be created as a result of the rule being triggered.
      • In the Description field, provide any additional information.
4. On the Selectors → Settings tab, specify the following settings:
   1. In the Filter drop-down list, select Create new.
   2. In the Conditions field, click the Add group button.
   3. In the operator field for the group you added, select AND.
   4. Add a condition for filtering by KATA value:
      1. In the Conditions field, click the Add condition button.
      2. In the condition field, select If.
      3. In the Left operand field, select Event field.
      4. In the Event field field, select DeviceProduct.
      5. In the operator field, select =.
      6. In the Right operand field, select constant.
      7. In the value field, enter KATA.
   5. Add a category filter condition:
      1. In the Conditions field, click the Add condition button.
      2. In the condition field, select If.
      3. In the Left operand field, select Event field.
      4. In the Event field field, select DeviceAssetID.
      5. In the operator field, select inCategory.
      6. In the Right operand field, select constant.
      7. Click the button.
      8. Select the category in which you placed the Kaspersky Endpoint Detection and Response Central Node server asset.
      9. Click the Save button.
   6. In the Conditions field, click the Add group button.
   7. In the operator field for the group you added, select OR.
   8. Add a condition for filtering by event class identifier:
      1. In the Conditions field, click the Add condition button.
      2. In the condition field, select If.
      3. In the Left operand field, select Event field.
      4. In the Event field field, select DeviceEventClassID.
      5. In the operator field, select =.
      6. In the Right operand field, select constant.
      7. In the value field, enter taaScanning.
   9. Repeat steps 1–7 in F for each of the following event class IDs:
      • file_web.
      • file_mail.
      • file_endpoint.
      • file_external.
      • ids.
      • url_web.
      • url_mail.
      • dns.
      • iocScanningEP.
      • yaraScanningEP.
5. On the Actions tab, specify the following settings:
   1. In the Actions section, open the On every event drop-down list.
   2. Select the Output check box.
   3. In the Enrichment section, click the Add enrichment button.
   4. In the Source kind drop-down list, select template.
   5. In the Template field, enter https://{{.DeviceAddress}}:8443/katap/#/alerts?id={{.EventOutcome}}.
   6. In the Target field drop-down list, select DeviceExternalID.
   7. If necessary, turn on the Debug toggle switch to log information related to the operation of the resource.
6. Click the Save button.

Step 3. Creating a correlator

You need to launch the correlator installation wizard. At step 3 of the wizard, you are required to select the correlation rule that you added by following this guide.

After the correlator is created, a link to these detections will be displayed in the details of alerts created when receiving detections from Kaspersky Endpoint Detection and Response. The link is displayed in the correlation event details (Related events section), in the DeviceExternalID field.

If you want the FQDN of the Kaspersky Endpoint Detection and Response Central Node server to be displayed in the DeviceHostName field, in the detection details, you need to create a DNS record for the server and create a DNS enrichment rule at step 4 of the wizard.