Configuring the settings of the connection to an ICAP network storage

To configure settings of the connection to an ICAP network storage:

1. Expand the Network Attached Storage Protection node in the Application Console tree.
2. Select the ICAP Network Storage Protection child node.
3. In the details pane of the ICAP Network Storage Protection node, click the Properties link.

   The Task settings window opens.

4. On the General tab in the fields of the ICAP service connection settings section specify the following settings:
   • Network port number
     

     The number of the ICAP server network port used to connect the network attached storage to the application.

   • Service ID
     

     An ID that makes part of the RESPMOD URI parameter of ICAP (see document RFC 3507). RESPMOD URI designates the address of an anti-virus ICAP server installed for the network storage area.

     For example, if the IP address of the protected server is 192.168.10.10, the port number is 1344, and the ID of ICAP service is avscan, those parameters result in the following RESPMOD URI address – icap://192.168.10.10/avscan:1344.

5. Click OK.

The newly configured settings are saved.

Once you have configured the connection settings, on the network attached storage you need to set the address of the connection to Kaspersky Security for Windows Server. The connection settings are included in this address. For example, if the default settings are used, the connection address looks as follows:

icap://<IP address of computer with Kaspersky Security for Windows Server installed>/avscan:1344