Configuring the ICAP Network Storage Protection task
By default, the ICAP Network Storage Protection task has the settings described in the table below. You can change the values of these settings.
When the task settings are modified (for example, a different security level is specified), Kaspersky Security for Windows Server immediately applies the new settings in the running task. Kaspersky Security for Windows Server logs the date and time when task settings were modified in the system audit log.
Settings of the ICAP Network Storage Protection task
Setting | Default value | Comment |
|---|---|---|
Security level | The Recommended security level is applied. | You can apply one of the preset security levels to the protected network attached storage, or specify the values of the security settings manually. |
Use heuristic analyzer | The Medium analysis level is applied. | The Heuristic Analyzer can be enabled or disabled and the analysis level configured. |
Use KSN for protection | Applied. | You can enable or disable the use of KSN services for ICAP Network Storage Protection. |
ICAP service connection settings |
| You can also modify other network storage connection settings. These changes should be incorporated on the network attached storages. |
Schedule | Not applied. The Run by schedule check box is cleared. The task is run manually. | You can configure the task to run by schedule, for example at Kaspersky Security for Windows Server startup. |
To configure settings of the ICAP Network Storage Protection task:
- Open the ICAP-Network Storage Protection window.
- On the General tab in the window that opens, configure the following task settings:
In the Security level section:
- Select one of the preset security levels or configure the security settings of objects manually.
- On the Schedule and Advanced tabs, configure the scheduled task launch settings.
- Click OK.
Kaspersky Security for Windows Server immediately applies the new values of settings to the running task. Information about the date and time when the settings were modified and the values of task settings before and after modification are saved in the task log.
