Kaspersky Secure Mail Gateway

Adding a record to the transport map and configuring email routing (transport_map)

To add a record to the transport map and configure email routing:

1. In the application web interface window, select the Settings → Built-in MTA → Domains section.
2. Click Add domain.

   The record creation window opens.

3. In the Record type drop-down list, select one of the following record types:
   • Domain.
   • Subdomains.
   • Email address.
4. In the field below, enter the domain name and subdomain name in FQDN format, or the email address.
5. Turn on the Local domain toggle switch if you want to add a local domain.
6. Turn on the Email routing toggle switch if you want to configure email routing for the record that you are adding.
7. In the Protocol drop-down list, select one of the email transmission protocols:
   • SMTP.
   • LMTP.
8. In the Host field, enter an IPv4 address (for example, 192.168.0.1), an IPv6 address (for example, 2607:f0d0:1002:51::4), a FQDN, or a domain name to which you want to configure mail routing.
9. In the Port field, enter the port you want to use for connecting to the server to which you want to route email.
10. If in the Host field, you specified a domain name, you can enable MX record lookup using the MX DNS Lookup toggle switch.
11. If you are adding a domain or subdomains, in the TLS security level for outgoing mail settings group, select one of the following options:
    • Use <mode configured in the TLS encryption section> if for all outgoing messages to this domain or subdomain, you want to use the TLS connection encryption mode that is set for all of the mail server's outgoing messages.
    • Override TLS security level for this domain if you want to configure a different connection TLS encryption mode for outgoing messages to this domain or subdomain.
12. If you have chosen an alternative TLS encryption mode for this domain or subdomain, in the drop-down list below, select the TLS encryption mode that you want to set for the connection.
    • No TLS Encryption.
    • Attempt TLS Encryption.
    • Require TLS Encryption and don't verify certificate.
    • Require TLS Encryption and verify certificate.

    By default, the No TLS Encryption mode is active.

13. Click Save.

The added record is displayed in the transport map.