Creating a UNI

You can create a UNI in a UNI template or on a CPE device. A UNI created in the UNI template is automatically created on all CPE devices that use this UNI template.

To create a UNI:

1. Create a UNI in one of the following ways:
   • If you want to create a UNI in a UNI template, go to the SD-WAN → UNI templates menu section, click the UNI template, and select the UNIs tab.
   • If you want to create an UNI on a CPE device, go to the SD-WAN → CPE menu section, click the CPE device, and select the UNIs tab.

   A table or list of UNIs is displayed.

2. Click + UNI.
3. This opens a window; in that window, in the Name field, enter the name of the UNI.
4. Specify the OpenFlow port to which the UNI is mapped in one of the following ways:
   • If you are creating a UNI in a UNI template, enter the OpenFlow port number in the OpenFlow interface field.
   • If you are creating a UNI on a CPE device, select the OpenFlow port in the Port drop-down list.
5. In the Encapsulation drop-down list, select the traffic classification type on the UNI:
   • Access (default).
   • VLAN If you select this option, in the VLAN ID field, enter the outer VLAN tag of the UNI. Range of values: 1 to 4094.
   • Q-in-Q If you select this option, do the following:
     1. In the VLAN ID field, enter the outer VLAN tag of the UNI. Range of values: 1 to 4094.
     2. In the Inner VLAN ID field, enter the inner VLAN tag of the UNI. Range of values: 1 to 4094.
6. If you are creating a UNI on a CPE device, in the QoS drop-down list, select a created quality of service rule for the UNI.
7. Click Create.

   The UNI is created and displayed in the table or list.

8. In the upper part of the settings area, click Save to save the settings of the UNI template or CPE device.

Page top