Running examples on Raspberry Pi 4 B

To run an example on a Raspberry Pi 4 B:

1. Go to the directory with the example and build the example.
2. Make sure that Raspberry Pi 4 B and the bootable SD card are prepared to run examples.
3. Copy the KasperskyOS-based solution image to the bootable SD card. To do this, connect the bootable SD card to the computer and run the following commands:

   # In the following command, [X] is the last alphabetic character in the name of the block

   # device for the partition on the bootable SD card.

   # In the following commands, the path ~/mnt/fat32 is just an example. You

   # can use a different path.

   $ sudo mount /dev/sd[X]1 ~/mnt/fat32/

   $ sudo cp build/einit/kos-image ~/mnt/fat32/kos-image

   $ sync

   $ sudo umount ~/mnt/fat32

4. Connect the bootable SD card to the Raspberry Pi 4 B.
5. Supply power to the Raspberry Pi 4 B and wait for the example to run.

   The output displayed on the computer indicates that the example started.

Page top