Separate Storage example

The Separate Storage example demonstrates use of the Distrustful Decomposition pattern to separate data storage for trusted and untrusted applications.

Example architecture

The Separate Storage example contains two user programs: UserManager and CertificateManager.

These programs work with data located in the corresponding files:

• The UserManager program works with data from the userlist.txt file.
• The CertificateManager program works with data from the certificate.cer file.

Each of these programs uses its own instance of the VFS program to access a separate file system. Each VFS program includes a block device driver linked to an individual logical drive partition. The UserManager program does not have access to the file system of the CertificateManager program, and vice versa.

This architecture guarantees that if there is an attack or error in any of the UserManager or CertificateManager programs, this program will not be able to access any file that was not intended for the specific program's operations.

A security policy in the Separate Storage example has the following characteristics:

• The UserManager program has access to the file system only through the VfsUser program.
• The CertificateManager program has access to the file system only through the VfsCertificate program.

Example files

The code of the example and build scripts are available at the following path:

/opt/KasperskyOS-Community-Edition-<version>/examples/separate_storage

Building and running example

To run an example on QEMU, go to the directory containing the example, build the example and run the following commands:

$ cd build/einit

# Before running the following command, be sure that the path to

# the directory with the qemu-system-aarch64 executable file is saved in

# the PATH environment variable. If it is not there,

# add it to the PATH variable.

$ qemu-system-aarch64 -m 2048 -machine vexpress-a15 -nographic -monitor none -sd hdd.img -kernel kos-qemu-image

See also Building and running examples section.

Preparing an SD card to run on Raspberry Pi 4 B

To run the Separate Storage example on Raspberry Pi 4 B, the following additional actions are necessary:

• The SD card must contain both a bootable partition with the solution image as well as 2 additional partitions with the ext2 or ext3 file systems.
• The first additional partition must contain the userlist.txt file from the ./resources/files/ directory.
• The second additional partition must contain the certificate.cer file from the ./resources/files/ directory.

To run the Separate Storage example on Raspberry Pi 4 B, you can use an SD card prepared for running the embed_ext2_with_separate_vfs example on Raspberry Pi 4 B, after copying the userlist.txt and certificate.cer files to the appropriate partitions.

Page top